A bright yellow client logo is a poor color for numbers and subheads on a white slide. Measure the color two ways, as text on the background and as a fill with text on it, and see what the getdeck New theme panel showed when I tried it.
If a client or issuer hands you a logo color to use as the deck’s accent, don’t judge it in one pass. Measure it twice.
Say the logo is a bright yellow, #FFD400. As text on a white slide (#FFFFFF) its contrast is about 1.4 to 1. Paint the same yellow as a fill and put dark navy text (#1E1B4B) on it, and you get about 11.2 to 1. I worked out both numbers with the contrast formula myself, and they matched what I later read off the getdeck screen below. For a yardstick I’ll use the text contrast levels in WCAG 2.2: at least 4.5 to 1 for body text and at least 3 to 1 for large text (W3C, checked 2026-11-18). That is a web accessibility guideline, not a rule for slides. It is still a concrete number for "can people read this", and it is enough to show that yellow text on white misses even the large-text bar. The same W3C page says one more thing. Text inside a logo is exempt, but text with low contrast because of corporate identity or brand guidelines is not exempt. Leave the logo alone, and measure the text in your deck that uses its color.
Picture a proposal day. This is a made-up scene. The issuer’s brand guide says yellow. It looks great on the cover band and the cards, so you also paint each slide’s key number yellow. One slide at a time you may not notice. On a bright laptop the yellow digits look a little faint, and then the file goes up on a big screen and the numbers sink into the background. The fix is not the yellow. It is the places where yellow is used as text. That is why splitting the check in two helps: text on the yellow fill already reads at 11.2 to 1, and only the text on the white background is the problem.
If only the text on the background fails, you have two options. Use a darker variant of that color for text only, or ask the client for a darker variant of their logo color. Keep the original yellow for fills. Whether a brand guide allows a darker variant differs by client, so check the guide before you use one. You can measure with whatever you already have. BrightCarbon describes a free color contrast checker inside its PowerPoint add-in BrightSlide (posted 2020-11-17, checked 2026-11-18), where a right-click on a shape shows the ratio and whether it passes WCAG. I haven’t installed that add-in myself.
The theme list on the left of the getdeck gallery has "+ New theme". It opens without logging in. Enter three HEX colors for background, text and accent and the screen says your colors show on every layout right away. The "Readability" list under them measures five pairs of text and background that the real layouts use. On 2026-11-18 I tried it on the production site, leaving the starting theme at Violet Pro and typing #FFD400 as the accent. Of the five pairs, only "Accent text on background" came up as hard to read, at 1.4 to 1. "Text on accent blocks" passed at 11.2 to 1. When I pressed "Make it readable", the accent became #8A7200 and "Accent text on background" read 4.7 to 1. It was not a free win. "Text on accent blocks" dropped from 11.2 to 1 to 4.7 to 1, because the yellow fill had turned into a dark gold one. Look at that number too before you press the button. If the text on the fill matters more, you may prefer to fix the text side instead.
What New theme measures is five pairs of text and background. Contrast for an accent used on bar charts, lines or icons is not one of the five. Saving a theme is a Pro feature, and logged out you get the preview only. I did not open a PPTX exported from a saved theme to check it, and I did not check how the colors look on a projector or in print.